Scientific Atlanta PowerVu D9234, Инструкция по установке и эксплуатации

Страница: 51 / 78

Step 5. Press 1 to save the new setting (YES), or follow the on-screen instructions, as
required.
Available options:
Press 1 to save the new settings (Yes), or press 2 to discard all
changes (No), or press 3 to cancel the operation (Cancel).
«+RZWRVHOHFWD1HWZRUN3UHVHW
Once you have configured the Network Presets you want, you can easily select a
preset while the receiver is in video mode by using the Remote Control unit.
To select a Network Preset while viewing video
Note: You must perform the following step within a two second duration.
Step 1. On the Remote Control unit, press FAVORITE (the current Network Preset is
displayed), key in the number of the configured Network Preset you want, and
press SELECT.
« $ERXWWKH6LJQDO6WDWH
During normal operation, your receiver is synchronized with the received LNB
signal (confirmed by the “
Lock, Sig “ status display). If the receiver is able to syn-
chronize to a carrier frequency only and no MPEG stream is present or is recog-
nized, the “
Lock, No Sig “ status is displayed, and the Signal indicator LED is OFF. If
no digital carrier signal is detected, the “ No Lock “ status is displayed, and the Signal
indicator LED is also OFF.
IMPORTANT! It takes several seconds for the newly selected Network Preset
to be displayed on screen.