Scientific Atlanta PowerVu D9234, Инструкция по установке и эксплуатации

Страница: 36 / 78

} $ERXWWKH3DVVZRUG
A unique Password (4-digit number) protects the current receiver settings against
unauthorized changes. When changing the Password, record and keep this number
in a secure location. The default password provided is
}
Default Password 1 2 3 4
It is recommended that you change the default Password to a different Password
when the receiver is first installed, and periodically afterward, as required.
To change the Password
Step 1. Move to Password and press SELECT to display the Password prompt.
A pop-up displays for entering the current password.
1
Displays subtitle text in the selected language (from a pre-defined language
group)
2
Other languages may also be available for selection, depending on your network
or jurisdiction (defined at uplink)
Step 2. Enter the current Password and press SELECT (for security, a default charac-
ter is substituted for each button pressed).
A pop-up displays for entering the new Password.
Step 3. Enter the new Password and press SELECT (any number from 0000 through
9999 is valid).
A pop-up displays for confirming the new Password.
Step 4. Enter the new Password again and press SELECT.
A pop-up displays to confirm that the new Password is ready to use.
Step 5. Repeat this action to change the current Password. If you make an error or
press the wrong button when entering the Password, press the
Í / Î arrow
buttons to cancel input, and start again. If the Password is lost or is unavail-
able, contact your dealer/reseller or local service provider for assistance.
} $ERXWIDFWRU\GHIDXOWV
The Factory Reset option is used for resetting the receiver to factory default set-
tings. When activated, the current receiver settings are replaced by the default set-
tings (see Table 7). After the factory defaults are restored, you can make any
changes, as required. Current receiver settings can be replaced at any time.
To restore the factory default settings
‰ Move to Factory Reset and press SELECT.
A pop-up menu displays available options (see Table 7).
After selecting the Factory Reset option you can
‰ Restore factory defaults: Press 1 to restore the factory defaults (YES)
‰ Cancel: Press 2 to cancel the operation (NO).
If no Remote Control is available, you can perform the these functions using the
following front panel buttons.
‰ Restore factory defaults: Press and hold down both the Í and Î arrow buttons
simultaneously to restore the factory defaults (YES)
‰ Cancel: Press and hold down both the Ï and Ð arrow buttons simultaneously to
cancel the operation (NO)
Table 6. Available video subtitle languages
Language Language Language
Arabic Hebrew Russian
Batak Hindi Sanskrit
Bengali Hungarian Serbian
Bulgarian Indonesian Sinhalese
Chinese Irish Spanish
Czech Italian Swedish
Dutch Japanese Tai
English Korean Tamil
Finnish Malay Thai
French Multiple 1 Ukrainian
Gaelic Polish Vietnamese
German Portuguese Undefined 1, 2, 3, 4 ,5 and 6 2
Greek Romanian OFF (Disabled)