46
Manage Programs and Recordings
If the SATA drive is
improperly disconnected
,
one of the following warning
banners appears.
If you improperly disconnected
the SATA drive from your DVR,
then attempt to reconnect the
drive to your DVR, one of the
following warning banners
appears. Follow the on-screen
instructions to restart the DVR.
If the power or data cables for
the SATA drive are unplugged
from the DVR
, a warning banner
appears. Check the DVR to make
sure the power and data cables
are properly plugged in.
If the DVR cannot read
the SATA drive
, a warning
banner appears. Follow the
on-screen instructions to
format the SATA drive.
Close
Attention
The external recording device is not functioning properly.
Check to make sure the power and data cables are plugged in properly.
Yes, Format
Cancel
Attention
The external storage device appears to be corrupted.
Format this external storage device?
NOTE: Existing recordings on this external storage device will be erased.
If you press Cancel, the external storage device will not be available.
Troubleshooting the SATA Drive
In the event that you encounter problems when connecting or disconnecting your
SATA hard disk drive, use the following warning banners to troubleshoot any
drive issues.
WARNING: Avoid electric shock. Unplug all electronic
devices before connecting or disconnecting any device
cables to the DVR.