573497 Rev B
10
All Search
If your device does not respond after trying all of the codes for your
brand, try the All Search procedure.
During All Search, the AllTouch Remote Control searches through a
library of codes until it finds the right one for your device. The
AllTouch Remote Control then completes the setup automatically.
Follow the steps below to do an All Search.
1. Turn on the device that you could not set up using the codes.
For example, if all the codes for your brand of VCR did not
respond, turn off your VCR. If the device is a CD Player, turn it
on and insert a disc.
2. Press and release the appropriate button on the remote control.
Device
Button
VCR
VCR
Auxiliary (such as a CD player)
AUX
TV
TV
HCT/Home Terminal
CBL
3. Press and hold
SET-UP
until the red light blinks twice.
4. Press
9
9
1
. The red light blinks twice.
5. Point your AllTouch Remote Control directly at the device.
6. Press
POWER
(or
PLAY
for CD player) then the appropriate button
(
VCR
,
AUX
,
TV
, or
CBL
). Repeat this step until your device turns on
or starts to play. You may have to repeat this 50 or 60 times.
Important!
Be patient and go slowly. Allow enough time for the
device to turn on or for the CD player to start.
T6058
