ScienTECH Vector S310, Инструкция по установке и эксплуатации

Страница: 17 / 43

12
4. The STATS button must be pressed to recall each data point: the number of pulses collected, the
average energy (AVG), minimum energy (MIN), maximum energy (MAX), standard deviation (SIGMA),
and coefficient of variation (CV%). After recalling the data, the flashing STATS annunciator indicates
the S310 is ready for a new run.
5. Press the SELECT button to begin a new run, or the CANCEL button to exit statistics mode.
Each time a new run begins, data from the previous run is lost. If statistical data is to be automatically
registered, it must be done so through the digital interface.
Select
The SELECT button activates a particular mode or function. Holding down the SELECT button will revert
the S310 to its operational state during group setup. Any changes made during group setup prior to holding
down the SELECT button will be implemented.
Cancel
The CANCEL button reverts the S310 to its operational state during group setup. Any changes made during
group setup prior to pressing the CANCEL button will
not be implemented. Pressing the CANCEL button
is the exit out of statistics mode and also is used to zero the display when using a calorimeter in watts
mode.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com