SciCan STATMATIC smart 1, Инструкция по эксплуатации

Страница: 3 / 60

1 Important Information
Page 3 STAT MATIC smart 1,2,3 EN
1 Important Information
Congratulations on purchasing a STAT MATIC smart. We are convinced that you have acquired the best product of its
kind. The STAT MATIC smart is a compact cleaning and maintenance system that can satisfy all your needs and
expectations regarding the cleaning and maintenance of instruments thanks to its diverse programs and capabilities.
This instruction manual contains all details on the installation, operation and maintenance of your STAT
MATIC smart
system. In order to guarantee many years of safe and problem-free operation, you should read the instructions prior to
commissioning the device and store them for future reference.
The instructions for the operation, maintenance and replacement of replacement parts must be followed so that the
device can function properly. The content of this instruction manual may change without notice in order to reflect
changes and improvements to the STAT
MATIC smart system.
Type description
The STAT MATIC smart is manufactured in 3 different versions.
STAT MATIC smart Type 1 is equipped with a DIN EN ISO 3964 coupling, which is operated by a motor as well as
2 neutral couplings that can be individually equipped with the required turbine adapters (see "Accessories" section).
STAT
MATIC smart Type 2 is equipped with two DIN EN ISO 3964 couplings, which are operated by a motor as well as
1 neutral coupling that can be individually equipped with the required turbine adapter (see "Accessories" section).
STAT
MATIC smart Type 3 is equipped with three DIN EN ISO 3964 couplings, which are operated by a motor.
Scope of delivery
Base STAT MATIC smart unit
Power supply connection cable
Instructions for use
Absorption pad (set)
Compressed air hose
SciCan "Dental Oil" (250 ml)
SciCan "Cleaner" (500 ml)
O-Ring Set
2 seal plugs (red) for media container
USB stick (2 GB)
General
The STAT MATIC smart has been developed and manufactured in accordance with the most recent quality and safety
standards.
However, some precautions should be taken during installation and operation.
•
Disconnect the STAT MATIC smart system from the power supply when leaving the practice for a longer period of time.
•
Protect the STAT MATIC smart from temperatures above 50°C.
•
Any changes or modifications made by a third party will invalidate the warranty as well as operating certification.
•
Only use original replacement parts for operation or repair, as these have been tested extensively for safety, function
and specific suitability. SciCan therefore also assumes any product responsibility for these parts and components.
•
Observe all warnings on the device and in the instructions for use.
•
The device may only be supplied with the voltage indicated on the type plate.
•
The power cable must not be replaced by a weak or underpowered power cable.
•
Operators are not allowed to perform maintenance on the unit in other respects than those stated in the instruction
manual.
•
Medical gloves have to be worn during commissioning, operation and maintenance of the device.
•
The device may only be operated with original SciCan "Cleaner", SciCan "Dental Oil" and accessories.
•
Prior to transport or before prolonged periods of standstill (> 30 days), the containers for cleaner and dental oil must be
emptied.
•
The operator must make sure that the device is in the proper operating condition prior to using the device as well as
confirm its functional safety.
•
A damaged device or a device with a damaged power cable has to be disconnected from the mains immediately.
Operating the device is not permitted in this case.
•
The device may only be operated inside buildings and areas that are not subject to explosive hazards.
•
Never open the protective housing of the device or insert objects through the openings of the protective housing.