48
NOTICE:
It is necessary to remove the Shrouds for this procedure. Refer to the “Replace the Shrouds” procedure.
It is necessary to adjust the Drive Belt tension at the end of this procedure. Refer to the “Belt Tension Adjustment” procedure.
Note:
Your machine may not match the image. For reference only.
1.
Unplug the AC Adapter from the wall outlet and machine.
2.
Loosen the hardware (A) that attaches the Right Foot Peg
to the frame assembly. Remove the hardware and Foot Peg, and
set them safely aside. Loosen and remove the screws (B) that
attach the Right Handlebar Arm to the Arm Pivot assembly. Set
them safely aside.
Be aware that the Pedals, Handlebars and Resistance
Fan are connected and when any of these parts move
the others do as well.
3.
Remove the Right Handlebar Arm and set it safely aside.
4.
Carefully remove the Top and Right Shrouds. Refer to the “Replace
the Shrouds” procedure in this manual.
5.
Loosen and remove the indicated screws that attach the Fan
Adjustment Plate Covers (*) and Front and Lower Fan Cage to the frame.
Carefully remove the Fan Cage sections and Fan Adjustment Plate
Covers. Set them safely aside for reassembly.
NOTICE:
Hold each section of the Fan Cage as you loosen the
screws so that it does not fall.
If necessary, loosen and
remove the screws that attach the sections of the Fan Cage
to each other.
A
B
C
D
E
*
