manualshive.com logo in svg

Schwinn AD7 AirDyne, Руководство по обслуживанию

Поделиться
Скачать
Schwinn AD7 AirDyne Скачать руководство пользователя страница 45

45

Note:

  Your machine may not match the image. For reference only. 

1.

  Unplug the AC Adapter from the wall outlet and machine. 

2.

  Using a #2 Phillips Screwdriver, loosen and remove the screws (*) 

that attach the left Fan Adjustment Plate Cover. Carefully remove the Fan 

Adjustment Plate Cover. Set the screws and cover safely aside for reas-

sembly.

3.

  Loosen and remove the indicated screws that attach the Front 

Fan Cage to the frame, and carefully remove the sections. Remove the 

bottom screws first and then the top screws. Set them safely aside for 

reassembly. 

 

NOTICE:

   Hold each section of the Fan Cage as you loosen the 

screws so that it does not fall.

4. 

Using a 6 mm hex key, loosen and remove the hardware that 

attaches Console/Mast Assembly to the frame. Set the hardware safely 

aside for reassembly.

 NOTICE:

   Hold the Console/Mast Assembly so that it does not fall. 

This step may require two people.

*

Содержание AD7 AirDyne
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды