manualshive.com logo in svg

Schwinn AD7 AirDyne, Руководство по обслуживанию

Поделиться
Скачать
Schwinn AD7 AirDyne Скачать руководство пользователя страница 38

38

Note:

  Your machine may not match the image. For reference only. 

1.

  Unplug the AC Adapter from the wall outlet and machine. 

2.

  Slide the Grommet up the Seat Post to expose the screws that attach 

the Top Shroud to the frame.

 Note:

   If necessary, remove the Seat Post and the Seat Adjustment 

Knob (A). Set them safely aside for reassembly. Remove the 

Grommet and set it safely aside for reassembly.

3.

  Using a #2 Phillips Screwdriver, loosen and remove the 4 screws 

(indicated) from the Top Shroud, and set them safely aside for reassembly.

4.

  Remove the Top Shroud and set it safely aside.

6.

  Turn the Right Crank Arm to point toward the back of the machine. 

Using a #2 Phillips Screwdriver, remove the 5 screws (indicated) that 

secure the Right Shroud. Remove the bottom screws first and then the top 

screws. 

6.

  Slowly remove the Right Shroud.

7.

  Turn the Left Crank Arm to point toward the back of the machine. 

Using a #2 Phillips Screwdriver, remove the 3 screws that secure the Left 

Shroud. Remove the bottom screws first and then the top screws. Slowly 

remove the Left Shroud.

8.

  Installation is the reverse procedure. Put the Right Shroud in position 

first to align the screws for the Left Shroud. Install the top screws first.

 NOTICE:

   Be sure the tabs in the Top Shroud snap into the Main 

Assembly.

9.  Final Inspection

Inspect your machine to ensure that all hardware is tight and compo-

nents are properly assembled.

Do not use until the machine has been fully assembled and 

inspected for correct performance in accordance with the 

Owner’s Manual.

Crank arms not shown

X2

A

Содержание AD7 AirDyne
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды