manualshive.com logo in svg

Schwing 30100750, Руководство по эксплуатации


Поделиться
Скачать
background image

Operation

Operation Manual - All 

S

P Rock Valve Model

s

74

revD

a

te

Towing the unit

Many accidents involving concrete pumps are traffic
accidents. To avoid accidents, you must remember this
one point...

yo

u

 

a

re not 

d

ri

v

in

g

 

a

 c

a

r

. You know those

yellow caution signs posted on the roads? The ones that
say 50 M.P.H. under the symbol for a curve in the
road? Those signs are meant for you, when you are
towing a pump. Most people ignore those signs when
they are in their car, because the car they drive feels
safe going around that curve at 60 M.P.H. When towing
a trailer-mounted concrete pump, this is NOT the case.
All caution signs will apply to you when you are
towing a pump. Slippery when wet, bridge out ahead,
and all the rest. Trailer-mounted concrete pumps are
heavy, which results in longer stopping distances. They
are top heavy, which can lead to rollovers at speeds that
would be no problem for a car. You can’t see directly
behind you, so backing up becomes dangerous, etc.
You know the rules of the road for trucks, or you
wouldn’t have passed the commercial driver’s license
exam. This section of the manual deals with the
specifics that they can’t include in the driver’s
manual...the way a trailer-mounted concrete pump acts
under various driving conditions.

Licen

s

ing.

If you don’t have a valid commercial driver’s license,
DO NOT TOW THIS UNIT.

Backing up.

You will be able to see the road behind you on the left
and right sides, but YOU WILL NOT BE ABLE TO
SEE DIRECTLY BEHIND YOU. If you must back up,
and there is any chance at all that there may be traffic
or pedestrians behind you, you must use a guide. A
guide is a person that watches for traffic, pedestrians,
and other obstructions, and stands in such a position
that you can see him (her) giving you instructions.
Installing a back up warning device such as a horn or
bell will give you some measure of safety, but you
can’t rely on it. For example, a child walking behind
your unit when you begin to back up may become
frightened by the back up warning sound and freeze
where they stand.

If you are in an isolated area where there will not be
traffic or pedestrians, you can get out of the cab and
look for obstructions before beginning to back up.

Changing lane

s

.

When towing a pump, you will have blind spots to your
right and left sides. Unfortunately, many drivers are
unaware of these spots, and will travel in them for
extended time periods. These spots are avoidable with
the use of convex mirrors, which attach on or below the
rear view mirrors. Before changing lanes, check these
convex mirrors for other drivers who may be ‘hiding’
there. Signaling well in advance will warn other drivers
of your intentions.

Loading the unit for 

s

hipment.

If the unit will be transported (such as by railroad or
ship), care must be taken to see that people and
property are protected during the loading process. In
these cases, remember the following points:

For Ramp Loading

•

Use only ramps that provide adequate and
stable support for loading purposes. Ensure
that no one would be hurt if the unit were to tip
or slip off of the ramps.

•

Be sure that the ramps will not cause the unit
to pivot beyond the ability of the hitch.

•

If you are using guides to provide instructions,
they must not remain in the driving zone.

•

Secure the machine on the transport vehicle
against rolling, slipping or tipping over.

For Crane Or Forklift Loading/unloading

•

If lifting the unit with a forklift, be sure that the
forks do not damage any components that sit
below the bottom of the subframe.

NOTE!

Do not 

a

ttem

p

t to lift the 

u

nit with 

a

 forklift

u

nless the 

u

nit is eq

u

i

pp

e

d

 with fork

ch

a

nnels.

•

Concrete pumps may only be moved by crane
if they have been equipped with slinging rings
that were designed for that purpose. Slinging
rings that were designed for this purpose can
be ordered from Schwing for installation on
new units, or for field retrofits.

•

Never hook lifting devices to standard pump
parts, like the concrete valve, hopper, or
anything else. These parts were definitely NOT
designed to support the entire unit load.

Home

TOC

TOC

Print

Print

Содержание 30100750





































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 30100750

Zehnder Rittling VS Series Installation, Operation And Maintenance Manual preview
VS Series
Бренд: Zehnder Rittling Страницы: 64
JAMA M8 Installer Manual preview
M8
Бренд: JAMA Страницы: 55
Navien NCB-150E Service Manual preview
NCB-150E
Бренд: Navien Страницы: 157
Navien NPE-180A Conversion Manualline preview
NPE-180A
Бренд: Navien Страницы: 2
Navien NPE-180A Quick Installation Manual preview
NPE-180A
Бренд: Navien Страницы: 4
York EVJC 12 Installation Instructions Manual preview
EVJC 12
Бренд: York Страницы: 204
Daikin altherma ERHQ014BAV3 Installation Manual preview
altherma ERHQ014BAV3
Бренд: Daikin Страницы: 32
Ducar DPT50 Owner'S Manual preview
DPT50
Бренд: Ducar Страницы: 30
LEYBOLD D10E Operating Instructions Manual preview
D10E
Бренд: LEYBOLD Страницы: 34
GE GEH50DFEJS Owner'S Manual preview
GEH50DFEJS
Бренд: GE Страницы: 24
Pentair MYERS MCI033 Owner'S Manual preview
MYERS MCI033
Бренд: Pentair Страницы: 16
Raypak Power Vent Raytherm 2100 Specifications preview
Power Vent Raytherm 2100
Бренд: Raypak Страницы: 2
JABSCO 31295-0092 User Manual preview
31295-0092
Бренд: JABSCO Страницы: 14
Walrus Pump TQCN1500 Instruction Manual preview
TQCN1500
Бренд: Walrus Pump Страницы: 12
Parkside PTPS 1100 B2 Translation Of The Original Instructions preview
PTPS 1100 B2
Бренд: Parkside Страницы: 122
Camplux ME40 Installation And Operating Instruction Manual preview
ME40
Бренд: Camplux Страницы: 20
Viessmann VITOCAL 300-G PRO Type BW 2150 Installation And Service Instructions Manual preview
VITOCAL 300-G PRO Type BW 2150
Бренд: Viessmann Страницы: 124
York E1RA Series Installation Instruction preview
E1RA Series
Бренд: York Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды