Schwank 40660000, Техническое руководство

Страница: 6 / 71

Revision: 3.0 Page 5 of 71
2. Safety
Safety instructions
The following safety instructions make no claim to completeness. If you have any questions, uncertainties or
problems, please contact your contract partner.
Qualified personnel
Only qualified personnel may carry out work such as transport, mounting, installation, commissioning, service
and maintenance. National and company accident prevention regulations must be strictly observed.
Documentation
Before installing and commissioning, please read this documentation and any other documentation to which
reference is made in its entirety. Incorrect handling can lead to personal injury or damage to property. It is
essential that you comply with the technical data, connection details and ambient conditions.
Safety requirements

Check the electrical equipment regularly.

When working on the electrical equipment, the device must be disconnected from the power supply.
Secure the device against unintentional restarting. Switching off at the main switch does not mean
that the control is de-energised.

Setting and changing the function parameters may only be carried out by Schwank service
technicians.
Intended use
The SchwankControl control is exclusively intended for the control of hall heating systems from Schwank. Any
other use or use going beyond this is considered improper use. Schwank GmbH accepts no liability for any
resulting damage. Risk through improper use is borne solely by the user.