3
1
Introduction
Congratulations on your MonsterFan
s‘
purchase.
The High Volume Low Speed fans (HVLS) of the MonsterFans series are energy-saving units
with high comfort and diameters from 3.6 m (12ft.) to 7.3 m (24 ft.). They move big amounts
of air at low rotational speed. The blades are streamlined and ideally engineered according
to the principles of aerodynamics.
With an output of 1.5 kW, the aluminum blades can move large air masses over a large area
and create a comfortable breeze. MonsterFans cool by lowering the ambient temperature.
In winter MonsterFans can effectively be used for destratification. Please also note the
warning notices for destratification.
1.1
Specifications
Diameter
3.6 m (12 ft)
4.9 m (16 ft)
6.1 m (20 ft)
7.3 m (24 ft)
Article no.
195 80 200
195 80 204
on request
195 80 212
Type
MF-C12
MF-C16
MF-C20
MF-C24
Max. Air Volume
621,000
m
3
/h
675,000
m
3
/h
729,000
m
3
/h
783,000
m
3
/h
Rounds per Minute
10-95 RPM
10-75 RPM
10-65 RPM
10-55 RPM
Weight*
104 kg
113 kg
124 kg
132 kg
Motor Power
1,5 kW / 2 hp
Max. Electrical
Consumption
3.23 A
3.23 A
3.23 A
3.23 A
Supply Voltage
3~400 V, 50 Hz
Max. Coverage Range
630 m
2
850 m
2
1.380 m
2
1.800 m
2
Sound Pressure Level
55 dB
measured at max. rotational speed at 5 m distance
*Notes: The weight specifications refer to the fan without controller and without mounting set or
further extension tube.
2
Safety Instructions
Read these use instruction carefully before starting the fan. Clear the operating
area of the fan from all obstacles to have enough space for the fan.
Before installation and maintenance work on the fan, ensure that the power
supply is disconnected.
Ensure that all safety precautions and instructions are followed when installing,
operating and maintaining the fan. Failures caused by disregarding these safety
precautions can result in serious injury or death. If you do not understand the
instructions, please contact your customer service.
Installation, power supply, commissioning, maintenance and repairs may only be
carried out by a qualified specialists who are familiar with national and local
guidelines for electrical installations and building regulations.
All electrical components are preprogrammed at the factory and ready for use.
