16
6
Commissioning
6.1
Test Run
Ideally, test the fan for 10 minutes to see if there is any unusual noise, vibration from the
device or from the safety steel ropes.
Also make sure that the fan runs safely with a sufficient safety distance to all possible
obstacles.
6.2
Warnings
•
A change in shape or the bending of rotor blades is strictly prohibited.
•
Please do not carry out any work or repairs while the device is switched on in order to
avoid an electric shock.
•
Please do not change the original technical structure of the fan.
•
Please do not open the switch box / Controller Box during operation to avoid an
electric shock.
•
Do not operate devices with malfunctions as this can lead to serious injuries.
•
Structural changes or parameter changes to the electrical control box are strictly
prohibited, as this can lead to equipment damage, injuries or death due to improper
use.
•
There are several electrical components integrated in the Controller Box. If you
disconnect the fan and Controller Box from power supply, please be aware that
electrical components inside the Contoller Box can have a residual voltage. Please
check this before working or wait 2 minutes till electricity will drop completely.
A switched off display is not an indication that the voltage has reached the safety level
in order to avoid an electric shock.
•
The installation and laying of the electrical cabling must be carried out by a qualified
specialist.
•
Please use the device components enclosed and specified by MonsterFans.
•
Do not interrupt the power supply while the fan is running. Otherwise the fan will be
damaged. The power supply may only be switched off, after the rotating blades have
stopped completely.
Commissioning;
1.
Make sure that the fan is free from obstacles
and potential hazards.
2.
Make sure that the input power supply is
correct and meets the requirements of the
product.
3.
Set the speed button to the minimum position.
4.
Switch on the fan and turn the control switch
from the STOP position to the RUN position.
5.
After the fan starts, adjust the speed button to
find the appropriate speed and ideal setting.
Caution:
1.
Suddenly disconnecting the
units from power supply is
prohibited during normal fan
operation.
2.
The fan is not programmed for
reverse operation.
If reverse operation is
activated, the rotating blades
must be absolutely stopped,
before changing the blades
direction. Otherwise serious
mechanical defects can
occur.
