14
Nord Motor Wiring
Clamps with a star bridge
Wiring Fan Motor
For the motor wiring, please remove the MonsterFans cover from the motor housing above
the motor connection box. Then wire the motor in star cabling according to the connection
diagram above. The fan is operated exclusively with 3 phases, 400 volts AC.
4.7
Oil Check and Oil Safety Pin
Please also check the oil level before starting up. There is a
safety pin
on the
bleed screw.
The safety pin must be removed before the initial start-up.
The
engine is operated with synthetic oil (lubricant: Synth ISO VG 680, quantity 3.1
litres).
After proper cabling and checking, you can turn on the power. The area around the fan
must be free of obstacles. Start with a test run of 10 minutes.
If the operation of the fan works properly, instruct the operator and please use the handover
protocol for a formal handover.
