Basic safety notes
10
09.00 | NSR mini 100 / PKL mini 100 | Assembly and Operating Manual | en |
0489056
2.5 Personnel qualification
The product must only be installed, removed, started up, operated
and serviced by qualified specialist personnel with the relevant
safety training.
All persons charged with operating, maintaining and servicing this
product must have access to the operating manual, especially the
chapter "Basic safety notes"
. We recommend that the
operator creates in-house safety operating instructions.
Trainees may work on machines and technical equipment in which
this product is installed, provided that they are supervised at all
times by qualified specialist personnel.
2.6 Organizational measures
Obeying the rules
The operator must employ suitable organizational measures and
instructions in order to ensure that the relevant safety rules are
obeyed by the persons asked to operate, maintain and repair the
product.
Checking the behavior of personnel
The operator must at least occasionally check that the personnel
are behaving in a safety conscious manner and are aware of the
potential hazards.
Danger signs
The operator must ensure that the signs concerning safety and
hazards on the machine where the product is mounted are clearly
legible and are observed.
Faults
If a malfunction occurs in the product and endangers safety, or if a
problem is suspected due to production behavior, the machine on
which the product is mounted must be stopped immediately and
remain shut down until the malfunction has been located and
remedied. Only allow specialists to remedy malfunctions.
Spare parts
Only use original SCHUNK spare parts.
Environmental regulations
The applicable environmental regulations must be observed for all
maintenance and repair work.
2.7 Using personal protective equipment
When using this product, you must comply with the relevant
health and safety at work rules and you must use the required
personal safety equipment (minimum: category 2).
