Function
2x connecting strip ASL2-G1/8" ID
no.: 1315007 suitable for clamping
station
NSL3 200-V1-T
Labeling 2x connecting strip
2x connecting strip (optional)
Fastening screws with air
supply (G1/8")
Sealing nipple NW 7.4
Locking coupling
type NW 7.4 (accessory)
Air connection turbo function
Open air connection module
2x connecting strip ASL2-G1/8"
5.5 Cone seal KVS3 (optional)
Upon customer request, VERO-S NSE3 and NSE3-V1 can be
retrofitted with a KVS3 cone seal without removing the unit from
the installation space. Via the cone seal, the quick-change pallet
system can be protected against the penetration of coolant and
chips into the change interface.
Note
The clamping stations VERO-S NSL3 are not fitted as standard to a
connection position for the exhaust function of the clamping
modules.
Note
To install the cone seal in a VERO-S NSE3, the plug fitted must first
be removed from the change interface. Use a hexagon socket
screwdriver for this purpose.
Note
The technical data and the exact installation instructions for the
cone seal can be found in the operating manual for the VERO-S
NSE3, NSE-T3 Document no .: 1152196.
37
03.00 | NSL3 | VERO-S quick-change pallet system | en | 1155408
