SCHUNK RST-P 060, Сборка и руководство по эксплуатации, Страница: 20 / 40

Handling and operation
20 02.01|RST-P 060 / 087|en
Handling and operation
Start-up
Measures for start-up
1 Check the technical specifications
(

6, Page 11) .
2 Do not use the module until trouble-free operation has been
checked taking all permissible operating parameters into ac-
count.
3 The swiveling time is ideally regulated via throttle check valves
(

7.2, Page 15) . The speed is always set so that it starts at a
low speed and increases to a higher speed until the desired
operating speed has been reached.
Starting up the module
1 Connect all power lines (compressed air)
(

7.2, Page 15) .
2 Setting the swiveling time
(

7.4, Page 18) .
3 Setting the end position dampers
(

7.5, Page 18) .
4 Test run as per actuation
(

8.2, Page 21) .
5 Correct settings, if necessary.
8
8.1
8.1.1
8.1.2