SCHUNK RST-D, Сборка и руководство по эксплуатации

Страница: 4 / 44

Table of contents
4
04.00 | RST-D | Assembly and Operating Manual | en | 389517
5.3.1 Adjusting the end positions .................................................................... 21
5.3.2 Set swivel time........................................................................................ 22
5.3.3 Setting the speed.................................................................................... 22
5.3.4 Setting the shock absorber stroke.......................................................... 23
5.3.5 Setting the end position dampers .......................................................... 24
5.4 Mounting the sensor .......................................................................................... 27
5.4.1
Overview of sensors ............................................................................... 27
5.4.2 Mounting inductive proximity switches IN 80, NI 30.............................. 28
5.4.3 Mounting MMS 22 magnetic switch....................................................... 29
6 Handling and operation .......................................................................................... 30
6.1 Measures before operation................................................................................ 30
6.2 Actuation ............................................................................................................ 31
6.2.1
Actuation of clockwise pulsing ............................................................... 31
6.2.2 Actuation of anti-clockwise pulsing ........................................................ 33
6.3 Calculating the total cycle time .......................................................................... 35
7 Troubleshooting ..................................................................................................... 36
7.1 Ring indexing table does not pulsing.................................................................. 36
7.2 Ring indexing table does not lock correctly........................................................ 36
7.3 Signal for piston position or zero point cycle ring monitoring missing .............. 36
7.4 Ring indexing table hitting in end positions ....................................................... 36
7.5 Useful load swings to end position..................................................................... 37
7.6 Cycle times are not reached ............................................................................... 37
8 Maintenance .......................................................................................................... 38
8.1 Maintenance interval ......................................................................................... 38
8.2 Inspect shock absorbers ..................................................................................... 38
8.3 Lubricants/Lubrication points (basic lubrication) .............................................. 38
8.4 Wearing parts ..................................................................................................... 39
8.5 Assembly drawing............................................................................................... 40
9 Translation of original declaration of incorporation ................................................ 41
9.1 Annex to Declaration of Incorporation............................................................... 42