Handling and operation
34
04.00 | RST-D | Assembly and Operating Manual | en | 389517
Description of anti-
clockwise pulsing
• RST-D in home position for operation of anti-clockwise pulsing
– Cycle ring in operating position and locked
– Pressurized connection: D
– Drive piston in end position CW
– Pressurized connection: A
– Sensor assignment: End position CW
Ø
RST-D in home position
Actuation of connection D -> C (locked -> unlocked)
Lock bolts release the cycle ring
Up to step 2: Waiting time at least 0.1s
Ø
Locking mechanism fully released
Actuation of connection A -> B (turn CW -> turn ACW)
Cycle ring is turned by predefined pitch
Ø
Sensor reaches end position ACW
Actuation of connection C -> D (unlocked -> locked)
Lock bolts lock the cycle ring
Up to step 4: Waiting time at least 0.1s
Ø
Cycle ring is locked, connection B is pressurized
Actuation of connection B -> A (turn ACW -> turn CW)
Drive piston is decoupled and is moved back
As of sensor leaving end position ACW (falling edge)
operations can be performed on the rotary table before new
pulsing starts.
Ø
Sensor reaches end position CW
Drive piston is in end position CW, home position is reached.
Ø
Introduction of new pulsing
