SCHUNK ROTA THWvario, Сборка и руководство по эксплуатации

Страница: 8 / 77

Basic safety notes
8 01.00|ROTA THW vario |en-US
Basic safety notes
The improper handling, assembly and maintenance of this product
may result in risk to persons and equipment if this manual is not
observed.
• Read through the manual carefully prior to assembly and
installation.
• Report any failures and damage to the manual lathe chuck
immediately following detection and repair it without delay to
keep the extent of the damage minimal and prevent
compromising the safety of the chuck. Only use original
SCHUNK spare parts when replacing damaged parts.
• Keep this manual accessible to all users at all times.
• If transferring the product to a third party, be sure to include
this manual.
Appropriate use
This product is intended for clamping workpieces on lathes and
other suitable machine tools.
• The product may only be used within the scope of its technical
data, (

6, Page 19) .
• The product is intended for industrial and industry-oriented
use.
• Appropriate use of the product includes compliance with all
instructions in this manual.
• The maximum speed and the necessary clamping force must be
determined by the operator for each clamping task in
accordance with the valid standards or technical specifications
of the manufacturer.
(Also see "Calculation for clamping force and speed of rotation"
in chapter "Technical data".) (

6, Page 19)
2
2.1