SCHUNK ROTA-S flex, Сборка и руководство по эксплуатации

Страница: 19 / 40

Technical data
Jaw type SFA 200 SFA 315 SFA 400 SFA 500 SFA 630
Weight / Set [kg] 2.0 5.6 13.5 13.5 40.0
The speed of rotation must be reduced for jaws with a higher
weight!
Max. oscillating diameter – with base jaws type SFG
ROTA-S flex 550 700 1000 1200 1400
Oscillating diameter Ø [mm] 570 755 1000 1265 1400
The chuck is balanced at Q 6.3 at rated speed.
6.2 Clamping force / speed diagrams
The diagrams relate to a 3-jaw chuck.
Clamping force/RPM curves have been calculated using long, hard
base jaws and hard SHF and SFA standard jaws. During this the
maximum actuating force was applied.
The diagrams showing short, hard base jaws and hard SHF and SFA
standard jaws can be found in the ROTA-S plus or ROTA-S plus 2.0
operating manuals contained in the scope of delivery
The chucks were in perfect condition and lubricated with SCHUNK
LINOMAX special grease.
After modification of one or several of these prerequisites the
diagram will no longer be valid.
Chuck setup for clamping force/RPM diagram
Measuring point
F / 3 Clamping force per jaw S Center of gravity
r
s
Center of gravity radius a
max
Max. jaw center of gravity
eccentricity in axial
direction
F
max
Actuating force
19 06.00 | ROTA-S flex | Assembly and Operating Manual | en | 0889139