SCHUNK ROTA-S flex, Сборка и руководство по эксплуатации

Страница: 8 / 40

Basic safety instructions
8 06.00 | ROTA-S flex | Assembly and Operating Manual | en | 0889139
• The safety and installation instructions, local applicable safety
and accident prevention regulations or the EC Machinery
Directive are not observed.
DANGER
Possible risk of fatal injury to operating personnel if a jaw
breaks or if the lathe chuck fails because the technical data have
been exceeded and a workpiece is released or parts fly off
•
The technical data specified by the manufacturer for using the
lathe chuck must never be exceeded.
•
The lathe chuck may only be used on machines and facilities
that fulfill the minimum requirements of the EC Machinery
Directive; specifically, they must have effective technical
measures to protect against possible mechanical hazards.
DANGER
Possible risk of fatal injury to operating personnel from clothing
or hair being caught on the lathe chuck and being dragged into
the machine
Loose clothing or long hair may become caught on projecting
parts of the lathe chuck and be drawn into the machine.
•
The machines and equipment must fulfill the minimum
requirements of the EC Machinery Directive; specifically, they
must have effective technical measures to protect against
potential mechanical hazards.
•
Always wear tight-fitting clothing and a hairnet when working
on the machine and the lathe chuck.
DANGER
Possible risk of fatal injury to operating personnel due to loss of
clamping force as a result of temperature changes between the
clamping procedure and machining due to loss of workpiece!
•
If the chuck jaws are expected to penetrate the workpiece
during the clamping procedure and if a temperature change
occurs between the clamping procedure and machining, it is
imperative that the lathe chuck is re-tensioned before
machining.
•
The larger the clamping diameter, the difference in the linear
expansion coefficient of the workpiece compared to steel and
the temperature range, the greater the loss of clamping force.