Assembly and settings
24
03.00 | RP / RW / RC | Assembly and Operating Manual | en | 389392
5.4 Settings and options of the RM... rotary module
5.4.1 Setting the swiveling time
The catalog data sheet contains data for the swiveling time.
The swiveling time is set with exhaust air throttles, these can be
found in the accessory pack.
NOTICE
The required swiveling time cannot usually be achieved through
merely adjusting the throttles!
To achieve the swiveling time, you always need to set/adjust the
end position dampening, too.
5.4.2 Setting the speed
NOTICE
Risk of damage to the product!
If the end position is approached too hard, the product may be
damaged.
•
Adjust exhaust throttle valve and shock absorber so that the
movement is braked smoothly.
Ø
Close exhaust throttle valve completely.
Ø
Open exhaust throttle valve until the product starts to move.
Ø
Continue to open the exhaust throttle valve incrementally until
the movement decelerates smoothly.
✓
If the speed is too low, the product will brake too soon and
the end position will be reached too slowly.
✓
If the speed is too high, the product will impact against the
end position and the shock absorber will be overloaded.
