SCHUNK PWG-plus 100, Сборка и руководство по эксплуатации

Страница: 40 / 52

Maintenance
40
09.00 | PWG-plus | Assembly and operating manual | en | 389495
7.5 Servicing and assembling the product
Maintenance
• Clean all parts thoroughly and check for damage and wear.
• Treat all greased areas with lubricant.
Lubricants/Lubrication points [
}
36]
• Oil or grease bare external steel parts.
• Replace all wear parts / seals.
Drawings [
}
46]
– Position of the wearing parts Drawings [
}
46]
– Order no. of the seal kits Seal kit [ } 7]
Assembly
• Unless otherwise specified, secure all screws and nuts with
Loctite no. 243 and tighten with the appropriate tightening
torque.
Tightening torque for screws [
}
43]
• On the variant with maintenance of gripping force "O.D.
gripping ", sizes 50-100, mount the cylinder piston with the help
of an assembly device
Sizes 50-100 [ } 44], with sizes 125-240
mount the cylinder piston with the help of a second assembly
device
Sizes 125-240 [ } 45].
7.5.1 Variant without maintenance of gripping force
Assembly is done in the opposite order of disassembly
Variant without maintenance of gripping force [ } 36].