SCHUNK PRG 100, Сборка и руководство по эксплуатации

Страница: 18 / 48

Assembly
18
08.00 | PRG | Assembly and Operating Manual | en | 389325
Ø
Check the evenness of the mounting surface,
Mechanical connection [
}
19].
Ø
Only open the required air connections (main connection or
direct connection),
Air connection [ } 22].
Ø
Connect the product via the hose-free direct connection.
✓
Use O-rings from the accessory pack.
✓
Seal main air connections which are not required with locking
screws.
Ø
OR: Connect compressed air lines to the main air
connections "A" and "B".
✓
Screw in air connections (plug connections).
OR: Screw on throttle valve in order to be able to perform
sufficient throttling and/or damping.
Ø
Screw the product to the machine/system,
Mechanical connection [
}
19].
✓
If necessary, use appropriate connection elements (adapter
plates).
✓
Use centering sleeves from the enclosed accessory pack.
Ø
Secure the gripper fingers to the base jaws,
Mechanical connection [ } 19].
✓
Use centering sleeves from the enclosed accessory pack.
Ø
Connect the sensor, see assembly and operating manual of the
sensor.
Ø
Mount the sensor, Mounting the sensor [ } 24].