SCHUNK PCFC, Сборка и руководство по эксплуатации, Страница: 34 / 40

EC declaration of incorporation
34 01.00 | PCFC | Assembly and Operating Manual | en | 1454631
9 EC declaration of incorporation
in terms of the Directive 2006/42/EG, Annex II, Part 1.B of the European Parliament and of
the Council on machinery.
Manufacturer/
Distributor SCHUNK GmbH & Co. KG Clamping and gripping technology
Bahnhofstr. 106 - 134
D-74348 Lauffen/Neckar
We hereby declare that on the date of the declaration the following partly completed
machine complied with all basic safety and health regulations found in the directive
2006/42/EC of the European Parliament and of the Council on machinery. The declaration
is rendered invalid if modifications are made to the product.
Product designation: Passive Compliant Force Control Tool / PCFC / electro-
pneumatic
The partly completed machine may not be put into operation until conformity of the
machine into which the partly completed machine is to be installed with the provisions of
the Machinery Directive (2006/42/EC) is confirmed.
Conformity with the following directives and standards is declared for the product:
Electromagnetic compatibility (EMC directive) 2014/30/EU
EN ISO 12100:2010 Safety of machinery - General principles for design -
Risk assessment and risk reduction
EN 61326-2-3:2013 Electrical equipment for measurement, control and
laboratory use - EMC requirements – Part 2-3: Particular
requirements – Test configuration, operational conditions
and performance criteria for transducers with integrated or
remote signal conditioning. (IEC 61326-2-3:2012)
The manufacturer agrees to forward on demand the relevant technical documentation for
the partly completed machinery in electronic form to national authorities.
The relevant technical documentation according to Annex VII, Part B, belonging to the
partly completed machinery, has been created.
Person authorized to compile the technical documentation:
Robert Leuthner, Address: see manufacturer's address
Lauffen/Neckar, March 2021 p.p. Ralf Winkler;
Head of Technology & Engineering,
Mechanics Gripping Systems