SCHUNK LDT Series, Сборка и руководство по эксплуатации

Страница: 95 / 156

Basic safety notes
05.00 | LDT | Montage- und Betriebsanleitung | en | GAS360927
93
2.14 Notes on particular risks
Generally valid:
• Remove the energy supplies before installation, modification,
maintenance, or adjustment work.
• Make sure that no residual energy remains in the system.
• Do not move parts by hand when the energy supply is
connected.
• Do not reach into the open mechanism or the movement area
of the module.
• Perform maintenance, modifications, and additions outside of
the danger zone.
• For all work, secure the unit against accidental operation.
• Take a precautionary approach by maintenance and
disassembly.
• Only specially trained staff should disassemble the module.
CAUTION
Possible risk of injury due to electrostatic energy!
Components or assembly groups may become electrostatically
charged. When touched, the electrostatic discharge can trigger a
startle response, which can result in injuries.
•
The operator must ensure that all components and assembly
groups are included in the local equipotential bonding in line
with the applicable regulations.
NOTE
• The equipotential bonding must be installed by a specialist
electrician in line with the applicable regulations, paying
particular attention to the actual conditions in the working
environment.
• The effectiveness of the equipotential bonding must be verified
by a specialist electrician through regular safety measurements.
• In the event of a power failure, uncontrolled movements may
occur.
• Expect faulty drive movements especially if the installed
monitoring devices are not yet effective.
• Check that product for transport damage.