SCHUNK LDT Series, Сборка и руководство по эксплуатации

Страница: 121 / 156

Maintenance and repair work
05.00 | LDT | Montage- und Betriebsanleitung | en | GAS360927
119
WARNING
Risk of injury due to squeezing!
At the moving linear axes, body parts can be squeezed and cause
injuries.
•
The danger zone must be surrounded by a safety fence during
operation.
WARNING
For safety reasons, maintenance work may only be carried out
on a unit which has been switched off and depressurized.
Certain maintenance work however (e.g. setting the operating
pressure) requires a system that is ready to operate.
•
Only carry out maintenance work which is described in this
document or for person who have been trained and
authorized.
NOTE
The maintenance work can either be carried out by the
customer, the person responsible for the technical care of the
unit, or by the manufacturer's service technicians.
If the customer is responsible for performing maintenance work
on the unit, we recommend participating in a training course at
the manufacturer's. In this training course you will be instructed in
the correct way to do maintenance work.