Assembly
28
04.00|1151449 KSPplus-BWM, KSP-LHplus-BWM |en
• Connections
I
and
II
for operation without a base plate.
• Connections
III
and
IV
in the base for hose-free, direct
connection to the machine table or on the base plate.
The threads for hose-free, direct connection are not designed for
pneumatic fittings.
Thread for pneumatic screwed connection (on the front):
KSPplus 100-BWM, KSP-LH plus 100-BWM: M5
KSPplus 100-BWM, KSP-LH plus 160-BWM: G1/8"
KSPplus 250-BWM, KSP-LH plus 250-BWM: G1/8"
NOTE:
All four air connections come sealed on delivery of the clamping
force block. On the base with set-screws (23) and on the front with
locking screws (11).
Requirements for compressed air supply: compressed air,
compressed air quality according to ISO 8573-1:6 4 4
Unconditioned compressed air contains moisture as well as dust
and oil particles, all of which can lead to malfunctions or
premature wear in the clamping force block. The oiler should be
no more than 2 meters from the coupling point.
The clamping force block has two more base connections (
V
) for
direct lubrication through the machine table. These connections
come sealed on delivery with set-screws (item 24).
Assembling the clamping block on the base plate
(If the two parts are delivered separately)
When mounting PLUS series TANDEM clamping force blocks on
ABP-h, ABP-a
or
SBP
TANDEM base plates, use the shorter
mounting screws included in the base plate accessory kit instead
of the standard mounting screws (item 19) that come with the
clamping force block.
For
KSPplus 100-BWM:
Use the
M8 x 30
screws from the base
plate accessory kit instead of the M8 x 35 screws (item 19).
For
KSPplus 160-BWM:
Use the
M10 x 35
screws from the base
plate accessory kit instead of the M10 x 40 screws (item 19).
For
KSPplus 250-BWM:
Use the
M12 x 40
screws from the base
plate accessory kit instead of the M12 x 45 screws (item 19).
NOTE:
If the clamping force block and base plate are ordered separately,
the screws, O-rings and clamping sleeves for assembling the parts
6.3
