_________________________________________________________________________________________
schunk.com
XND.00020.002_B
–
06/2020
22
Description of the clamping device
The KSC has been designed for centric clamping of raw parts and finished workpieces.
The force is generated mechanically and the power gear ratio is linear across the whole clamping
range.
3.1
Function
The KSC is a direct vice with a driven mechanically via a capsuled thread.
The force is generated directly in a linear manner, without a force amplifier.
The clamping forces depend on the torque.
Both jaws and carriages close respectively open synchronously and are symmetrical with respect
to the position holes in the tool body.
The vice is also suitable for workpiece clamping from the inside to the outside.
Operation (standard operation)
4.1
Clamping / aligning
KSC 125 L-160 / L-235
The basic model includes the following interfaces:
Two positioning holes Ø12 H7 centre distance 50 mm, to positioning and fixing on the 50 grid plates
and on T-slot tables with fitting screws Ø12 f7/M12 or cylinder screws M12.
Locating hole Ø25 H6 and positioning hole Ø12 H7 (distance 66 mm) to attaching the clamping bolt
and the indexing pin for the VERO-S quick change palleting system.
