Maintenance
01.00 | EGI | Assembly and Operating Manual | en | 1396645
37
8 Maintenance
8.1 Maintenance intervals
Interval
(million cycles)
for EGI 80
Maintenance work
2 / as
required
Clean the product dry. Remove all coarse dirt and
chips from the cavities in the product.
Inspect the product for damage. Replace the
product if necessary.
Have all repair work on the product carried out
only by SCHUNK.
Update firmware.
8.2 Disassembly and assembling
This product must not be disassembled for maintenance.
NOTICE
Material damage due to improper disassembly!
Incorrect works can cause damage to the mechanics and internal
electronics.
•
Disassembly or opening of the product is not permitted.
•
Only allow SCHUNK to repair the product.
