SCHUNK EGI 80, Сборка и руководство по эксплуатации

Страница: 6 / 44

General
6
01.00 | EGI | Assembly and Operating Manual | en | 1396645
1.1.3 Symbol definition
The following symbols are used in this manual:
■
Prerequisite for an action
Ø
Action
✓
Intermediate result
✔
Final result
1.1.4 Applicable documents
• General terms of business*
• Catalog data sheet of the purchased product *
• Assembly and operating manuals of the accessories *
• "EGI with PROFINET interface" software manual *
The documents marked with an asterisk (*) can be downloaded on
our homepage
schunk.com
1.1.5 Sizes
This operating manual applies to the following sizes:
• EGI 80
1.1.6 Variants
This operating manual applies to the following variations:
• EGI PROFINET with the current release variant
1.2 Warranty
The warranty is 24 months or a maximum of 10 million cycles *
from the date of delivery from the production facility if used as
intended under the following conditions:
• Observe the ambient conditions and operating conditions,
Ambient conditions and operating conditions [ } 9]
• Observe the specified maintenance and lubrication intervals,
Maintenance [ } 37]
Parts touching the workpiece and wear parts are not included in
the warranty.
* One cycle consists of a complete gripping process:
"Open gripper" (release workpiece) and
"Close gripper" (grip workpiece).