Basic safety notes
01.04|AGE-XY 50 - 80|en
5
Basic safety notes
Intended use
The product was designed to compensate a pocess-related dis-
placement in XY plane. A mechanical center locking using a posi-
tive piston is included as a standard in the product. A position
storage via a pneumatic cylinder is optional available.
The product is intended for installation in a machine/system. The
requirements of the applicable guidelines must be observed and
complied with.
The product may be used only in the context of its defined applica-
tion parameters
(
6, Page 9)
.
The product is designed for industrial use.
To use this unit as intended, it is also essential to observe the
technical data and installation and operation notes in this manual
and to comply with the maintenance intervals.
Not intended use
A usage not according to the intended use exists:
• If the product is used for a purpose other than that described in
the chapter “Intended use”.
Ambient conditions and operating conditions
• Make sure that the product has a sufficient size for the applica-
tion.
• Make sure that the environment is free from splash water and
vapors as well as from abrasion or processing dust. Exceptions
are products that are designed especially for contaminated en-
vironments.
Product safety
Dangers arise from the product, if:
• the product is not used in accordance with its intended pur-
pose.
• the product is not installed or maintained properly.
• the safety and installation notes are not observed.
2
2.1
2.2
2.3
2.4
