Assembly
12
01.04|AGE-XY 50 - 80|en
Sensors
• If you require further information on sensor operation, contact
your SCHUNK contact person or download information from
our homepage.
• Technical data for the sensors can be found in the data sheets
(included in the scope of delivery).
MMS 22 magnetic switch
Fig. 3
Fig. 4
NOTICE
Sensor can be damaged during assembly.
Do not exceed the maximum tightening torque of 10 Ncm for the
set screws.
NOTE
Ferromagnetic material changes the switching positions of the
sensor. For example: Adapter plate made of ordinary steel.
At ferromagnetic adapter plates:
• The module must firstly be mounted on the adapter plate
• Then, the positions of the magnetic switch have to be set
7.3
7.3.1
