Retrofit kit for handheld scanner
02.00 | SVP-2D / SVP-2D/H / SVP-4 / SVP-3 | Assembly and Operating Manual | en | 0289052
19
3.4 Operation
Handheld scanner
Data Matrix Code
Toolholder TRIBOS
NOTE
From software version SV1.4 the handheld scanner CR6000 can be
operated directly at the SVP-3 / SVP-2D / SVP-2D/H without DC-
DC adapter.
Switching to scanner operation is done via the
DataMatrix-Code
:
Lock code
Unlock code
The DataMatrix-Codes are shown in the TRIBOS pressure table on
the device. For the switching process, the corresponding
DataMatrix-Code must be scanned.
The manual operation is locked via the lock code. Now, entries can
only be made via the scanner.
If the unlock code is used, only the manual operation is active.
