Retrofit kit for fixed scanner
02.00 | SVP-2D / SVP-2D/H / SVP-4 / SVP-3 | Assembly and Operating Manual | en | 0289052
9
Fastening the cable
The retrofit kit contains 3 brackets with an adhesive layer and 1
magnetic bracket for fastening the cable.
Magnetic bracket
Ø
Remove the protective film of the adhesive layer and fasten the
3 brackets to the bracket of the pressure body.
Ø
Fasten the magnetic bracket to the housing.
Ø
Connect the scanner cable to the brackets.
Ø
DANGER Danger of electrical voltage inside the housing!
Before removing the back panel, disconnect clamping device
SVP from power supply.
Unscrew the screws from the back wall and remove the back
wall.
Distance bolts
15 pin Sub-D
15 pin Sub-D
9 pin Sub-D
Ø
Insert the cable of the Dataman 50S and the connecting cable
from above into the two sleeves.
Ø
Turn the sleeves 90 ° to the left so that the opening of the
sleeves is not up.
Ø
Install the distance bolts on the 15 pin Sub-D connector ot the
connection cable.