Schumacher IP-1825, Руководство пользователя

Страница: 7 / 24

• 7 •
10. MOVING AND STORAGE INSTRUCTIONS
10.1 Store the Portable Power in an upright
position.
10.2 Store inside, in a cool, dry place.
10.3 Do not store the clips on the handle,
clipped together, on or around metal, or
clipped to cables. The clips on the Portable
Power are live and will produce arcing or
sparking if they come in contact with each
other. To prevent accidental arcing, always
keep the clips on the storage holders when
not using them to jump start a vehicle.
10.4
If the Portable Power is moved around the
shop or transported to another location,
take care to avoid/prevent damage to the
cords, clips and Portable Power. Failure
to do so could result in personal injury or
property damage.
11. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE REASON/SOLUTION
The Portable Power won’t
jump start my car.
Clamps are not making a good
connection to the battery.
Connections are reversed.
The Portable Power’s battery is
not charged.
The vehicle’s battery is defective.
Check for poor connection to
battery and frame. Make sure
connection points are clean.
Disconnect the Portable Power
and reverse the clamps.
Press the Battery Status button
on the front of the unit. The LEDs
will indicate the status of charge.
Have the battery checked.
The Portable Power won’t
power my 12V device.
The 12V device is not
turned on.
The Portable Power’s battery is
not charged.
The 12V device draws more
than 15A or has a short circuit.
Turn on the 12V device.
Check the battery charge status
by pressing the Battery Status
button.
Disconnect the 12V device.
The internal breaker will
automatically reset after a
minute or two. Try the 12V
device again.
The battery in the
Portable Power won’t
hold a charge.
The battery is bad (will not
accept a charge).
Replace the battery.
12. BEFORE RETURNING FOR REPAIRS
If these solutions do not eliminate the problem, or for more information
about troubleshooting, contact customer service for assistance:
services@schumacherelectric.com
www.batterychargers.com
or call 1-800-621-5485
Monday-Friday 7:00
am
to 5:00
pm
CST
For REPAIR OR RETURN , contact Customer Service at 1-800-621-5485.
DO NOT SHIP UNIT
until you receive a
RETURN MERCHANDISE AUTHORIZATION
(RMA) number from Customer Service at Schumacher Electric Corporation.