•
7
•
NOTE:
If the compressor overheats, the built-in thermal protection will turn
the unit off. Wait a few minutes and it will automatically restart.
Estimated Time for Inflating
Vehicle 13” to 16”
3 to 16 Minutes
Bike Tire
30 to 40 Seconds
Sports Balls
5 to 30 Seconds
Use an air compressor gauge to ensure the proper pressure has been
reached. Do not over-inflate.
USING THE BUILT IN LIGHT
11.
Position the Instant Power on a flat, stable surface near the intended work
11.1
area.
Turn the light ON/OFF switch to the ON position. The light will turn on and
11.2
illuminate your work area.
NOTE:
With a fully charged internal battery, the built in light will provide up
to 215 hours of continuous, useful light.
Turn the ON/OFF switch to the OFF position when the work is complete.
11.3
Charge the battery as soon as possible after using the built-in light.
11.4
MAINTENANCE
12.
Before performing maintenance, disconnect the Instant Power from any
12.1
batteries and DC powered devices and make sure that all switches are in
the OFF position.
After each use, use a dry cloth to wipe all battery corrosion, dirt and oil
12.2
from the terminals, cords and the case.
Through routine maintenance, ensure that all user-installed parts are
12.3
secured.
Servicing does not require opening the unit. There are no user-serviceable
12.4
parts inside.
