•
2
•
INSTANT POWER FEATURES
2.
OPERATING INSTRUCTIONS, USING THE QUICK-CONNECT
3.
BATTERY CLAMPS
warnInG: Failure to follow instructions may cause damage or an
explosion. read entire instruction manual before use.
Turn the vehicle’s ignition OFF before making cable connections.
3.1
Make sure the ON/OFF switch on the Instant Power is in the OFF position.
3.2
Plug the battery clamp cable assembly’s quick-connect into the connector
3.3
attached to the Instant Power.
Clamp the red clamp (+) to the positive terminal of the battery (For a nega-
3.4
tive grounded system. See section
3.9
for a positive grounded system.)
Clamp the black clamp (-) to an unpainted and unmoving part of the
3.5
chassis or engine block.
Jump Start/USB ON/OFF
1.
Switch
Battery Status Push
2.
Button
Battery Status Lights
3.
Built in LED Light
4.
Light ON/OFF Switch
5.
USB Port
6.
Rubber Base
7.
Air Compressor ON/OFF
8.
Switch
Air Compressor Gauge
9.
Air Compressor Hose
10.
Quick-Connect Connector
11.
12V DC Power Outlet (not shown)
12.
Internal Charger Plug
13.
Battery Clamp Cable Assembly
14.
Ring Terminal Cable Assembly
15.
Air Compressor Accessory Bag
16.
(not shown)
Contains: Ball Inflation Adapter and
Two Miscellaneous Adapters
5
1
2
3
4
7
6
8
9
10
11
12
13
14
15
