•
6
•
MAINTENANCE AND CARE
A minimal amount of care can keep your
battery charger working properly for years.
•
Clean the clamps each time you are
finished charging. Wipe off any battery fluid
that may have come in contact with the
clamps to prevent corrosion.
•
Occasionally cleaning the case of the
charger with a soft cloth will keep the finish
shiny and help prevent corrosion.
•
Coil the input and output cords neatly when
storing the charger. This will help prevent
accidental damage to the cords and charger.
•
Store the charger unplugged from the AC
power outlet in an upright position.
•
Store inside, in a cool, dry place. Do not
store the clamps clipped together, on or
around metal, or clipped to the cables.
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
REASON/SOLUTION
Battery clamps do not spark
when touched together.
The charger is equipped
with an auto-start feature.
It will not supply current to
the battery clamps until a
battery is properly connected.
The clamps will not spark if
touched together.
No problem; this is a normal
condition.
All three LEDs come on for 2
seconds, then turn off.
The charger is plugged into
an AC outlet.
No problem; this is normal.
The charger will not turn on
when properly connected.
AC outlet is dead.
Poor electrical connection.
Battery is defective.
Check for open fuse or circuit
breaker supplying AC outlet.
Check power cord and
extension cord for loose
fitting plug.
Have battery checked.
I cannot select a 6V or 12V
setting.
The charger is equipped
with Auto Voltage Detection,
which automatically detects
the voltage and charges the
battery.
No problem; this is normal.
SPECIFICATIONS
XC6-CA
Input Voltage ........................................................................................120V AC @ 60Hz, 1.5A
Output Voltage .............................................................6V or 12V, with Auto Voltage Detection
Output Current Rating......................................................2A DC @ 6V DC; 6A DC @ 12V DC
XC10-CA
Input Voltage ........................................................................................120V AC @ 60Hz, 2.5A
Output Voltage .............................................................6V or 12V, with Auto Voltage Detection
Output Current Rating....................................................2A DC @ 6V DC; 10A DC @ 12V DC
