background image

 

28

 

2.  PERSONAL PRECAUTIONS

RISK OF EXPLOSIVE GASES. PREVENT FLAMES AND SPARKS. PROVIDE 

ADEQUATE VENTILATION DURING CHARGING.

2.1 

NEVER smoke or allow a spark or flame in the vicinity of a battery or engine.

2.2 

Remove personal metal items such as rings, bracelets, necklaces and watches 

when working with a lead-acid battery. A lead-acid battery can produce a short-

circuit current high enough to weld a ring or the like to metal, causing a severe burn.

2.3 

Be extra cautious to reduce the risk of dropping a metal tool onto the battery. It might spark 

or short-circuit the battery or other electrical part that may cause an explosion.

2.4 

Use this charger for charging LEAD-ACID batteries only. It is not intended to supply power 

to a low voltage electrical system other than in a starter-motor application. Do not use this 

battery charger for charging dry-cell batteries that are commonly used with home appliances. 

These batteries may burst and cause injury to persons and damage to property.

2.5 

NEVER charge a frozen battery.

2.6 

NEVER overcharge a battery.

2.7 

Consider having someone close enough by to come to your aid when you work near a 

lead-acid battery.

2.8 

Have plenty of fresh water and soap nearby in case battery acid contacts your skin, 

clothing or eyes.

2.9 

Wear complete eye and body protection, including safety goggles and protective clothing. 

Avoid touching your eyes while working near the battery.

2.10 

If battery acid contacts your skin or clothing, immediately wash the area with soap and 

water. If acid enters your eye, immediately flood the eye with cold running water for at least 

10 minutes and get medical attention right away.

2.11 

If battery acid is accidentally swallowed, drink milk, the whites of eggs or water. DO NOT 

induce vomiting. Seek medical attention immediately.

3.  PREPARING TO CHARGE

RISK OF CONTACT WITH BATTERY ACID. BATTERY ACID IS 

A HIGHLY CORROSIVE SULFURIC ACID.
3.1 

If it is necessary to remove the battery from the vehicle to 

charge it, always remove the grounded terminal first. Make sure 

all of the accessories in the vehicle are off to prevent arcing.

3.2 

Be sure the area around the battery is well ventilated while the battery is being charged.

3.3 

Clean the battery terminals before charging the battery. During cleaning, keep airborne 

corrosion from coming into contact with your eyes, nose and mouth. Use baking soda and 

water to neutralize the battery acid and help eliminate airborne corrosion. Do not touch 

your eyes, nose or mouth.

3.4 

Add distilled water to each cell until the battery acid reaches the level specified by the battery 

manufacturer. Do not overfill. For a battery without removable cell caps, such as valve regulated 

lead acid batteries (VRLA), carefully follow the manufacturer’s recharging instructions.

3.5 

Read, understand and follow all instructions for the charger, battery, vehicle and any 

equipment used near the battery and charger. Study all of the battery manufacturer’s 

specific precautions while charging and recommended rates of charge.

3.6 

Determine the voltage of the battery by referring to the vehicle owner’s manual and make 

sure that the output voltage selector switch is set to the correct voltage. If the charger has 

an adjustable charge rate, charge the battery in the lowest rate first.

3.7 

Make sure that the charger cable clips make tight connections.

4.  CHARGER LOCATION

RISK OF EXPLOSION AND CONTACT  

WITH BATTERY ACID.

4.1 

Locate the charger as far away from the 

battery as the DC cables permit.

4.2 

Never place the charger directly above the 

battery being charged; gases from the battery will 

corrode and damage the charger.

WARNING

WARNING

WARNING

WARNING

WARNING

WARNING

Содержание SI-1275A





































Отзывы: