Schulte 2 Series Скачать руководство пользователя страница 60

Страница: 60 / 182

OPERATION

FX-1800/FX-1200 07/20

Operation Section 4-2

SCHULTE FX-1800/FX-1200

ROTARY CUTTER OPERATION INSTRUCTIONS

Schulte FX-1800/FX-1200 rotary cutters are manufactured with quality material by skilled workers. These

cutters are designed to cut grass, weeds, crop stalks, brush and other vegetation up to 4” diameter. The cutter

is equipped with protective deflectors and/or chain guards to prevent objects being thrown from the cutter by

the blades, however, no shielding is 100% effective. All shields, guards, deflectors, and chains equipped on the

unit must be maintained on the mower in good operational condition.
It is the operator’s responsibility to be knowledgeable of all potential operating hazards and to take every

reasonable precaution to ensure oneself, others, animals, and property are not injured or damaged by the

cutter, tractor, or a thrown object. Do not operate the cutter if passersby, pets, livestock, or property are within

300 feet of the unit.
•

All THROWN OBJECT SHIELDING

including, Front and Rear Deflectors, Chains Guards, Steel Guards,

Bands, Side Skirts and Skid Shoes in place and in good condition when mowing.

•

Mower sections or wing are adjusted to be close and parallel to ground without exposing blades.

•

MOWING AREA

has been inspected and foreign materials and debris have been removed.

•

PASSERSBY

are inside enclosed vehicle.

This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper cutter

use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in

explaining the operation of a flex-wing rotary cutter and are not necessarily of a FX-1800/FX-1200 cutter.

Some pictures may show shields removed for picture clarity. NEVER OPERATE this implement without all

shields in place and in good operational condition. The operator must be familiar with the cutter and tractor

operation and all associated safety practices before operating the cutter and tractor. Proper operation of the

cutter, as detailed in this manual, will help ensure years of safe and satisfactory use.

IMPORTANT:

To avoid mower damage, retorque all bolts after the first 10 hours of operation. Retighten blade

carrier retaining nut on gearbox lower shafts to 600 ft. lbs.

READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS

MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND

IMPLEMENT.

If you do not understand any of the instructions, contact your nearest authorized dealer for a

full explanation. Pay close attention to all safety signs and safety messages contained in this manual and

those affixed to the implement and tractor.

OPS-U- 0001

READ, UNDERSTAND, and FOLLOW the following Safety Messages. Death or serious

injury may occur unless care is taken to follow the warnings and instructions stated in the

Safety Messages. Always use good common sense to avoid hazards.

(SG-2)

Содержание 2 Series























































































































































































Результаты поиска

Содержание 2 Series

Отзывы:

Бренды по названию

Популярные бренды

Schulte 2 Series, Руководство оператора

Результаты поиска

Содержание 2 Series

Отзывы:

Бренды по названию

Популярные бренды