Schulte 2 Series Скачать руководство пользователя

Страница: 25 / 182

SAFETY

FX1800/FX1200 07/20

Safety Section 1-15

HAZARDS WITH MAINTENANCE OF IMPLEMENT - (CONTINUED)

AVOID DEATH OR SERIOUS INJURY FROM COMPONENT FAILURE BY KEEPING

IMPLEMENT IN GOOD OPERATING CONDITION IN PERFORMING PROPER

SERVICE, REPAIRS AND MAINTENANCE.

PERFORM SERVICE, REPAIRS, LUBRICATION AND MAINTENANCE OUTLINED IN IMPLEMENT

MAINTENANCE SECTION:

•

INSPECT

for loose fasteners, worn or broken parts, leaky or loose fittings, missing or broken cotter keys

and washers on pins, and all moving parts for wear.

•

REPLACE

any worn or broken parts with authorized service parts.

•

LUBRICATE

unit as specified by lubrication schedule.

•

NEVER

lubricate, adjust or remove material while it is running or in motion.

•

TORQUE

all bolts and nuts as specified.

BLADE INSPECTION:

•

REPLACE

bent, damage, cracked or broken blades immediately with new blades.

•

AVOID

blade failures and thrown broken blades.

DO NOT

straighten, weld, or weld hard-facing blades.

SAFETY SHIELDS, GUARDS AND SAFETY DEVICES INSPECTION:

•

KEEP

all Deflectors, Chain Guards, Steel Guards, Gearbox Shields, and PTO integral shields, Bands,

Side Skirts and Skid Shoes in place and in good condition.

•

REPLACE

any missing, broken or worn safety shields, guards and safety devices.

Cancer and Reproductive Harm

www.P65Warnings.ca.gov

PN HM02-A

Содержание 2 Series























































































































































































Результаты поиска

Содержание 2 Series

Отзывы:

Похожие инструкции для 2 Series

Бренды по названию

Популярные бренды

Schulte 2 Series, Руководство оператора

Результаты поиска

Содержание 2 Series

Отзывы:

Похожие инструкции для 2 Series

Бренды по названию

Популярные бренды