Classification ZVEI CB24I, Source
C2
Classification ZVEI CB24I, Sink
C1
C2
Elektriske data - diagnoseutgang
Designation, Diagnostic outputs
OUT
Voltage drop U
d
, maximum
2 V
Voltage, Utilisation category DC-12
24 VDC
Current, Utilisation category DC-12
0,05 A
Voltage, Utilisation category DC-13
24 VDC
Current, Utilisation category DC-13
0,05 A
Statusvisning
Merk (Lysdiode for brytertilstandsindikator)
Koblingsforhold: gul lysdiode
Feil funksjonell defekt: rød lysdiode
Tilførselsspenning UB: grønn lysdiode
Pin-tildeling
PIN 1
A1 Matespenning
PIN 2
X1 Sikkerhetsinngang 1
PIN 3
A2 GND
PIN 4
Y1 Sikkerhetsutgang 1
PIN 5
OUT DIagnostisk utgang
PIN 6
X2 Sikkerhetsinngang 2
PIN 7
Y2 Sikkerhetsutgang 2
PIN 8
IN Solenoidkontroll
Note about the safety classification
2
The safety consideration of the guard locking function only applies for standard devices with monitored solenoid interlock
AZM300Z-…-1P2P-… (see Ordering code). A safety assessment of the guard locking function for devices with serial
diagnostics "SD2P" is not allowed due to the non-safe locking/unlocking signal from the SD Gateway.
2
If for a certain application the power to unlock version of a solenoid interlock cannot be used, for this exception an interlock
with power to lock can be used if additional safety measure need to be realised that have an equivalent safety level.