6 / EN
EN· 30.30.01.02952 · 00 · 07/21
4
Checking the delivery
The scope of delivery can be found in the order confirmation. The weights and dimensions are listed in the delivery
notes.
1.
Compare the entire delivery with the supplied delivery notes to make sure nothing is missing.
2.
Report any damage caused by defective packaging or that has occurred in transit to the carrier and to
Schmalz immediately.
5
Installation Instructions
CAUTION
Improper installation or maintenance
Personal injury or damage to property!
During installation and maintenance, make sure that the area gripper is disconnected and
depressurized and that it cannot be switched on again without authorization.
For safe installation, the following instructions must be observed:
1.
Use only the connections, mounting holes and attachment materials that have been provided.
2.
Carry out mounting and removal only when the device is in an idle, depressurized state.
3.
Pneumatic and electrical line connections must be securely connected and attached to the area gripper.
5.1
Mounting the Area Gripper
CAUTION
Compressed air or vacuum in direct contact with the eye
Serious eye injuries!
Wear eye protection
Do not look into compressed air openings
Do not look into the silencer air stream
Do not look into vacuum openings, e.g. suction cups
CAUTION
Noise pollution due to incorrect installation of the pressure and vacuum connections
Hearing damage!
Correct installation.
Wear ear protectors.
The area gripper is attached using sliding blocks. Special sliding block strips for holding the sliding blocks are
integrated into the main body. The system can be adapted directly using the sliding block strip, a robot flange or a
spring-mounted suspension eye.
