Schlumberger RoadMAPS Скачать руководство пользователя | Manualshive

Страница: 2 / 82

background image

This manual is an unpublished work and contains the trade secrets and confidential infor-
mation of Schlumberger Resource Management Services, Inc., which are not to be
divulged to third parties and may not be reproduced or transmitted in whole or part, in
any form or by any means, electronic or mechanical for any purpose, without the express
written permission of Schlumberger Resource Management Services, Inc. All rights to
designs or inventions disclosed herein, including the right to manufacture, are reserved
to Schlumberger Resource Management Services, Inc.
The information contained in this document is subject to change without notice. Schlum-
berger reserves the right to change the product specifications at any time without incur-
ring any obligations.

Trademarks used in this manual

RouteMaps

TM

and RoadMAPS

TM

are trademarks of Schlumberger Resource Manage-

ment Services, Inc. Other brands or product names are the trademarks or registered
trademarks of their respective holders.

FCC Registration

RoadMAPS Unit complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This unit may not cause harmful interference, and
(2) This unit must accept any interference received, including interference that may cause
undesired operation.

RoadMAPS Unit device complies with Industry Canada RS210

Operation is subject to the following two conditions:
(1) RoadMAPS Unit may not cause interference, and
(2) RoadMAPS Unit must accept any interference, including interference that may cause
undesired operation of the unit.

Copyright © 1999
Schlumberger Resource Management Services, Inc.
All rights reserved.

RoadMAPS

TM

User’s Manual 2.0

Literature No. SY-0043.1-GB-012.99

Resource Management Services
5430 Metric Place
Norcross, GA 30092-2550
Tel: (770) 446-1991
Fax: (770) 263-8104

«
1
2
3
4
...
»

Содержание RoadMAPS



















































































Отзывы:

Нет отзывов

Похожие инструкции для RoadMAPS

XCL AT-150 SERIES

Бренд: XAC Страницы: 8

Бренд: Response Страницы: 2

Бренд: VeriFone Страницы: 2

Бренд: FingerTec Страницы: 5

Бренд: eTung Страницы: 52

BGS3 GPRS Terminal

Бренд: Sectron Страницы: 21

Бренд: Hisense Страницы: 14

Бренд: Hisense Страницы: 15

Бренд: Hisense Страницы: 18

Бренд: Hisense Страницы: 32

Бренд: Hisense Страницы: 36

Бренд: ID Tech Страницы: 16

Бренд: Idemia Страницы: 34

Бренд: NCR Страницы: 244

Бренд: EBN Страницы: 40

Бренд: ABB Страницы: 643

Бренд: HP Страницы: 129

Бренд: IBM Страницы: 162

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды