February 2014
www.swstechnology.com
copyright of SLB
Diver-NETZ Static
Can I use my own FTP server?
Yes, this is possible. In the Diver-Gate(S) you can configure the address of your own FTP server. Schlumberger
Water Services can provide you with information regarding the requirements and steps to undertake this.
What are the requirements for a FTP server?
The FTP server must be a standard none secured FTP server.
What GSM frequency bands are used by the Diver-Gate(S)?
The GSM module of the Diver-Gate(S) makes use of the following frequency bands 850/900/1800/1900 MHz (Quad
band).Frequency band 900 and 1800 MHz are used in most parts of the world: Europe, Middle East, Africa, Australia,
Oceania (and most of Asia). In North America, GSM operates on the primary mobile communication bands 850 MHz
and 1900 MHz. In South and Central America some countries use 850 en 1800 MHz.
Which mobile data services are supported by the Diver-Gate(S)?
The GSM module of the Diver-Gate(S) makes use of GPRS services (2.5G). GPRS is a wireless data transfer protocol
that is used to connect mobile devices to the internet. It operates through the cellular network. To successfully use
the Diver-Gate(S) device the telecom provider needs to support GPRS services.
Which SIM cards can be used?
By default SWS makes use of universal SIM cards. Universal SIM cards grant GSM services in nearly every country
in the world generally at lower costs than other SIM cards. SWS can provide a list of GSM providers supported by
the universal SIM cards in a specific country. Please be aware that the GSM provider still needs to support GPRS to
successfully deploy Diver-NETZ Static. See also previous question.
Can I use my own local SIM card?
Yes, this is possible. SWS can provide you with information regarding the requirements and needed steps to
configure the Diver-Gate(S) with local SIM cards.
Can I start/stop/reprogram a Diver with Diver-NETZ?
Yes, this can be done remotely. Schlumberger Water Services can provide you additional information.
I do not have a radio connection between the Diver-Gate(S) and the Diver-DXTs?
Please follow the next steps:
•
From 07:00 PM to 23:00 PM the radio of the Diver-DXT will be in sleep mode to save battery capacity.
Making a connection can therefore take more time (longer than 5 minutes).
•
Make sure you use the correct Network ID. For selecting the correct Network ID see the Diver-Mobile
Manual.
•
The radio connection can be distorted by Wifi signals transmitting at the same radio band of Diver-NETZ
•
Check if the Radio LED on the Diver-Gate(S) is blinking during scanning and continuously on during data
transfer. If not, the problem could be the Diver-Gate(S).
Содержание Diver-NETZ
