Schlumberger Diver-NETZ, Руководство пользователя

Страница: 29 / 52

February 2014
www.swstechnology.com
copyright of SLB
What are the max/min operating temperatures of the Diver-DXT?
The Diver-DXT operating temperature range is from -20 °C up to +80 °C. The battery life time will decrease when the
device is used below 0°C and/or above 40°C.
How much water can be on top of the Diver-DXT?
The Diver-DXT is designed to withstand up to 1 meter water pressure for 7 days. Please note that the barometric
sensor will not measure the barometric pressure while immersed in water.
Is the old Diver-DXT compatible with the new Diver-DXT?
No, the new Diver-DXT is not compatible with the old Diver-DXT (produced until 2009).
Can I download the barometric data when the Diver-DXT fails?
No. The Diver-DXT must be returned to SWS. In most cases SWS can retrieve your data from the Diver-DXT.
Can other people connect with Diver-NETZ to my Divers?
The Diver-DXT and the Diver-Gate(M) can be protected by a Network-ID.
Diver-NETZ Mobile
How does Diver-NETZ Mobile work?
The figure below depicts the setup of the Diver-NETZ. From left to right: The Diver is suspended on a Diver-DXT
cable with on top the Diver-DXT. The Diver-DXT sends information (data) wirelessly to the Diver-Gate(M). The
Diver-Gate(M) can be wirelessly connected through Bluetooth to a Windows Mobile based device. On this device
the Diver-Mobile application needs to be installed to communicate with the Diver. The Diver-Mobile application will
store the Diver data and can optionally send the data to a FTP server.
What do I need to know about Bluetooth?
Bluetooth is a simple two-way wireless radio technology that allows different devices to connect between
each other without the use of cables or infrared waves. This technology is robust, low-power and low-cost. The
short range radio link provides connectivity between different devices, such as mobile phones, PDAs, PCs and
other electronic devices. It is designed to be used in small range communication and allows voice and data
communication. It operates in the 2.4 GHz radio spectrum. Each class provides a different power output and they
have different communication ranges. This is certified in three different types of standard: Class 1 (100 meters),
Class 2 (10 meter), Class 3 (1 meter). The Diver-Gate(M) has a Class 2 (10 meter) Bluetooth module.
Can I use a mobile phone?
Yes, you can use a mobile phone with Diver-Mobile installed on it. The following hard- and software requirements
are needed to install Diver-Mobile:
• Windows Mobile version 6.1 and higher
• Minimum of 4 GB of Flash memory (SD card)
• Minimum of 128 MB of RAM
• Bluetooth version 2.0 and later
• Data-plan: if you want to send the data to a FTP server