manualshive.com logo in svg

Schlumberger Diver-NETZ, Руководство пользователя, Страница: 18 / 52

Поделиться
Скачать
Schlumberger Diver-NETZ Скачать руководство пользователя страница 18

February 2014

Page 12

www.swstechnology.com

copyright of SLB

4.  Preparing for installation

This chapter describes the activities to undertake before deploying Diver-NETZ in the field. Diver-NETZ Mobile and 
Diver-NETZ Static solutions are discussed separately.

4.1.  Diver-NETZ Mobile

Before going into the field, the user needs to make sure the following steps are undertaken:

• 

Installation of Diver-Office software

• 

Installation of Diver-Gate driver

• 

Charging the Diver-Gate(M) battery

• 

Programming of Diver dataloggers

• 

Connect Diver to a DXT cable and a Diver-DXT

• 

Setup network ID in Diver-DXT

• 

Start barologger Diver-DXT 

• 

Pairing Diver-Gate(M) (only when mobile device is used)

Installation of Diver-Office software

Diver-Office 2012.1 or higher is needed to configure the Diver and Diver-DXT devices. The software can be 
downloaded for free from the swstechnology website (www.swstechnology.com). Users who already have installed 
an older version of Diver-Office can update directly from within the Diver-Office software.

Installation of Diver-Gate driver 

The Diver-Gate driver is a computer program that controls the Diver-Gate(M) (or Diver-Gate(S)) when connected to 
a computer through a USB cable. The driver can be downloaded as an executable from the swstechnology website 
(www.swstechnology.com). Appendix VI contains the driver installation steps.

Charging the Diver-Gate(M) battery

When charging the Diver-Gate(M) for the first time it is necessary to connect the micro USB cable to a USB charger 
(not provided) and not charge the Diver-Gate(M) using a laptop or PC via a micro USB cable. The Diver-Gate(M) 
needs to be turned on while the charger is connected. Leave it on until fully charged, indicated by the Charge LED 
turning off (approximately 5 hours). 

If the Diver-Gate(M) is used on a regular basis the device can be charged using any USB port (PC, car USB charge, 
etc.). In this case the Diver-Gate(M) can be turned off while charging. It is also possible to charge the Diver-
Gate(M) continuously. The Bluetooth functionality of the Diver-Gate(M) can be used while continuously charging. 
However, this is only possible when using a USB charger (not possible using a USB port).

Programming of Diver dataloggers

The Diver dataloggers can be programmed with a Diver USB reading unit and Diver-Office software. For more 
information about programming Diver dataloggers see the Diver manual on the swstechnology website.

Connect Diver to a DXT cable and a Diver-DXT

The Diver is screwed on the bottom connector of the DXT cable and the Diver-DXT is screwed on the top connector 
of the DXT communication cable. Through the safety cords the Diver-DXT can be secured to the communication 
cable. See illustration for more details.

The radio is deactivated during shipment to the client. The radio will automatically activate (turn on) when the 
Diver-DXT is connected to a Diver via a DXT cable. The clock of the Diver-DXT will automatically synchronize once 

Содержание Diver-NETZ





















































Отзывы:

Нет отзывов