Schleuniger ACO 08, Руководство по эксплуатации

Страница: 41 / 52

Diagnosis / Troubleshooting
Operating Manual
| Edition 1.00 (08-2020) | ACO 08 41 | 52
8 DIAGNOSIS / TROUBLESHOOTING
Faults may occur, among others, when major physical stresses or soiling affect the components.
Regular inspection and maintenance of the product reduce the potential of unexpected faults and
increase operational reliability and service life. Maintenance work must be carried out in
accordance with instructions and at the specified intervals.
See chapter
9 Maintenance
.
Notice
Personnel qualifications
The instructions listed in this chapter must be carried out by a
technical specialist
!
8.1 WHAT TO DO IN THE EVENT OF PROBLEMS
Our customer service team is available if problems occur that cannot be rectified using the
operating manual. It is essential to have a precise description of the problem immediately available
in such situations:
■
Exact product designation
■
Serial number of the product (rating plate)
■
Machine type used
■
Exact description of the fault (fault number and text on the operating panel if available)
■
Under which conditions did the fault occur?
8.2 POSSIBLE MACHINE FAULTS
Error pattern
Cause Possible measures
Measurement not carried out External trigger
Start encoder defective / not
connected
Internal trigger
Force sensor not connected /
defective
Force too low to reach
threshold
Force bypass
Check plug connection;
replace start encoder
Check force sensor connection,
replace force sensor
Adapt threshold; check
whether tool, terminal, cable
are correct
Check or clean the tool/base
plate area
Measurement is carried out, no
force signal
External trigger
Force sensor not connected /
defective
Check force sensor connection,
replace force sensor